Bottomshield withEasy Application and Cleanup Technologyprovides season-long protection for powerboats and sailboats Designed for easy application and cleanup, and to provide a full season of antifouling protection, BottomShield Antifouling Paint uses the latest technology available to create a hybrid paint film strong enough to handle the tough marine environment without building up over time. It offers the durability of a hard paint, but also self-polishes over time like a seasonal ablative. Soap and water cleanup along with no strong solvent smell yields a user-friendly application. BottomShield Easy Application and Cleanup Technology will not require sanding between coats saving time and money. With lower VOC release, BottomShield is a good choice for marinas under restrictions. Key Features Cleans up easily with soap and water Provides season-long antifouling protection No sanding between coats saves time and money Suitable for powerboats and sailboats Low-VOC formula is better for the environment Physical Data Vehicle Type: Water-based emulsion Finish: Flat Available Colors: Blue, Green, Red, Black Components: 1 Curing Mechanism: Solvent release Solids by Weight (Theoretical): 72% +/- 2% Solids by Volume (Theoretical): 40% +/- 2% Coverage: 500sq.ft/gal. VOC: 145g/l max. (1.25lb./gal.) Active Ingredients: 25.2% Cuprous Oxide Flash Point: None Application Application Method: Brush, roller, airless or conventional spray Number of Coats Recommended: 2 minimum, with additional coat(s) on leading edges and waterline recommended Dry Film Thickness/coat: 1.5mil. (3.75 wet mil.) Applicator: Maximum 3/16” nap roller Application Temperature Min./Max. Range: 50F.-90F. Thinner: Water Drying Times*